Untitled Document

We also have a wide range of services to provide the
extreme sports enthusiasts . One of the most popular
services there is to offer is our partner Custom Concepts
Powder Coating. Below you can read on exactly what
powder coating is. We have the biggest powder coating
plant in Detroit doing a wide range of products. Our line of
work in powder coating does not stop with off road
products. We do anything! Car frames,
Shelves,Bikes,Rims and just about everything that can be
powder coated. Not to mention our quality cannot be
surpassed. We have provided coating for some very big
names in Sprint Car racing,ATV racing and our latest is
Detroit brothers that were on discovery channel.. Below is
a price guide. The prices are just an estimate is subject to
change upon notice.

What is powder coating?
Powder coating is by far the youngest of the surface finishing
techniques in common use today. It was first used in Australia about
1967.

Powder coating is the technique of applying dry paint to a part. The
final cured coating is the same as a 2-pack wet paint. In normal wet
painting such as house paints, the solids are in suspension in a liquid
carrier, which must evaporate before the solid paint coating is
produced.

In powder coating, the powdered paint may be applied by either of
two techniques.

* The item is lowered into a fluidised bed of the powder, which may
or may not be electrostatically charged, or
* The powdered paint is electrostatically charged and sprayed onto
the part.

The part is then placed in an oven and the powder particles melt and
coalesce to form a continuous film.
There are two main types of powder available to the surface finisher:
* Thermoplastic powders that will remelt when heated, and
* Thermosetting powders that will not remelt upon reheating. During
the curing process (in the oven) a chemical cross-linking reaction is
triggered at the curing temperature and it is this chemical reaction
which gives the powder coating many of its desirable properties.

Frame and sub frame +$60 for prep

solid colors $225

translucent $250

dormant colors $275

Gusset Frame

Standard Gusseting $175

with Pro peg mounts add $60

Stock $55 solid colors $75 translucents

Aftermarket $75 solids $85 Translucents

Add $60 dollars for prepping on frames
Bumpers/Grab bars
Most styles $20 ($15 for grab bars)

A Arms
Aftermarket only, or stock with
removable ball joints

$55 for solid colors

$70 for Translucents

$10 each for disassembled caliper solid
colors

$15 each for disassembled caliper
translucent colors

add $5 for disassembly/reassembly if
sent complete

Spindles

$15 each Solids $22 for Translucents

Case covers/Center cases

$35 per case solid colors